FUJITSU Dot Matrix Printer DL3850+ Drivers– Fujitsu has released the DL 3850+ series dot matrix printer, a Fujitsu dot matrix printer with high print speed and the ability to print documents up to A3 size. The DL-3850+ is suitable for any office environment.
Get professional prints when using this Fujitsu dot matrix printer, which has several important features, including automatic paper parking and loading, auto tear off, and the ability to print barcodes/bar codes.
The Fujitsu DL3850+ has a printhead with many pins of 24 wire/pin, meaning it has 24 needles. These needles will hit the ribbon (printer ribbon) to form a character on the paper.
When the printer head moves from left to right while touching the paper, the letters that have been patterned in a needle arrangement will immediately appear. This letter pattern is then received by a carbon tape behind which there is paper, and letter-by-letter printing occurs.
The dot metric printer printing speed is called “characters per second” or cps. The print speed is 135 cps (12 cpi), 113 cps (10 cpi) / Letter, up to 537 cps (12 cpi), 448 cps (10 cpi) / High-speed draft quality.
With the ability to print printouts of up to 5 layers (1 original layer and four copy layers), you will get optimal efficiency. It has a memory buffer of 128 KB, which will provide a high processing speed.
This printer uses the Standard DL3x50+ / DL7400 cartridge tape, with the code KA0404-C801. It has a printhead lifespan of 400 million characters and a ribbon lifespan of 5 million characters, so when using this type of dot matrix printer, you won’t have to worry about changing the ribbon too often.
Printers with the dot matrix type are indeed created with a resolution that is not too high, in contrast to inkjet and laser printers. This printer is widely used for printing sales receipts and travel documents in factories or offices, with a print resolution of 360 x 360 dpi.
The connectivity offered by the Fujitsu dot matrix is effortless, making it easier for every user to use the Parallel + USB interface: IEEE 1284 and USB 1.1 Type B.
With a printing width of 136 columns (10 cpi) and 163 columns (12 cpi). The paper used for printing on this printer uses Continuous Form paper with a width of 102 to 420 mm (4.0 to 16.5″) and a length of more than 102 mm (over 4.0″), and Cut Sheet with a paper width of 102 to 420 mm (4.0 to 420 mm).
Dimensions and Weight
This Fujitsu dot matrix printer is an A3 print printer, so it has a fairly large size with dimensions of 57 cm (W) x 33 cm (D) x 13 cm (H) and weighs 9.7 kg.